Past auctions

4 AVAILABLE - 2" x .134" Dahlstrom Stainless Tube Mill Lines

• Tube Diameter: .625" - 2"
• Wall Thickness: .020" - .134"
• Speed: 90 - 165 inches/min
• 12" x 2500# Cooper Weymouth Double End Uncoiler (8" - 20" Coil ID, 48" OD, Electric Brake)
• Forming Mill: Model 500-10-08 (Shaft Size: 2.5")
• Entry Brush De-Burr Unit, 2 Sets of Edge Guides, 5 Forming Stands, 3 Finn Pass Stands, 7 Side Idler Rolls
• 2 Roll Weld Box, Mill Maxstar 700 Tig Welder, Cyclomatic Model 90A Arc Controller, Water Cooler, Hammer Roll Bead Roller
• 3 Sizing Stands, 3 Side Idler Rolls, Turks Head, Flying Abrasive Saw Cut-Off, Run Out Dump Table
• Single Motor Mill, Siemens Simatic HMI Digital Controller, Yaskawa Digital Drive, Siemens Simatic S7-1200 PLC
• 150 KW Ajax Tocco Power Supply, Model Pacer S10

Sunbeam Roller Hearth Bright Annealing Furnace

• Max Operating Temperature: 2200°F
• Furnace Width: 48", Furnace Length: 30', Cooling Length: 60'
• Capacity: 5000 lbs/hr Tubing
• 3 Zones, Hydrogen, Nitrogen, Argon Gases
• Atmosphere Engineering Flow Controller, Hydrogen/Nitrogen Atmosphere Controlled
• Cooling Zone with Water Cooled Trays, Seco Warwick Digital Controls, Digital Atmosphere Control Panel
• Entry & Exit Conveyors

1.125 Etna Swedger

• 1.250" - .280" Diameter
• Clamping Device, Hydraulic Unit, Tooling

1 3/4" Mackintosh Hemphill Tube Straightener

• Serial No. 922
• Tube Diameter: 1.750" - .313"
• 6 Roll Design, Entry & Exit Tables
• Manual Roll Adjustment with Readouts, 2 Motor Drive

Ingersoll Rand Air Dryer

• Model: TMS 0780
• Max Air Pressure: 232 Bar 16
• Min & Max Ambient Temp: 32°F / 115°F
• Max Inlet Air Temp: 131°F
• Design Press: 14.5 PSI (1 bar) to 146 PSI (17 bar)

Gardner Denver Air Compressor

• Model: 2449-436
• 150 HP
• MAWP: 150 PSI @ 250°F
• MDMT: -20°F @ 150 PSI

Ingersoll Rand Air Compressor

• Model: SSR-EP150
• Capacity: 670 CFM
• Rated Operating Pressure: 125 PSIG
• Max Discharge Pressure: 128 PSIG
• Drive Motor: 150 HP

300 Ton Evapco Cooling Tower (NEW)

• Model: USS-112-4M14
• Belt No. 6B148
• 2 Armstrong Pumps (Model: 4300-8x8x15-4p-100hp)
• Flow: 1500 USgpm, 100 HP Motor, Max Pressure: 175 PSI
• 1500 gpm pump

#3 Sink Bench/Draw Bench

• Diameter Range: 2 3/8" - 3/8", Tube Length: 120'
• Wall Thickness: .020" - .191"
• Draw Force: 39,345#
• Draw Chain Speed: 209 Feet/Min
• Single Chain, Single Die Block, 250 HP Motor, 3 Snubbers
• Entry & Exit Conveyors, Tooling

#3 Draw Bench Cell

• Diameter Range: 2 3/8" - 3/8", Tube Length: 120'
• Wall Thickness: .020" - .191"
• Draw Force: 48,802#
• Draw Chain Speed: 169 Feet/Min
• Single Chain, Single Die Block, 250 HP Motor
• Entry & Exit Conveyors, Ultrasonic Bar Washer (2021), Wash & Rinse Tanks
• Bar Loader Conveyor, Tube Conveyor, Reeler To Remove Inner Mandrel Bars, Tooling

#2 Sink Bench

• Diameter Range: 2 3/8" - 3/8", Tube Length: 120'
• Wall Thickness: .020" - .191"
• Draw Force: 39,345#
• Draw Chain Speed: 209 Feet/Min
• Single Chain, Single Die Block, 250 HP Motor, 3 Snubbers
• Siemens Panelview 550 Digital Controller, Ultrasonic Tube Wash, Siemens Simatic HMI
• Entry & Exit Conveyors, Tooling

#2 Draw Bench Cell

• Diameter Range: 2 3/8" - 3/8", Tube Length: 120'
• Wall Thickness: .020" - .191"
• Draw Force: 48,802#
• Draw Chain Speed: 169 Feet/Min
• Single Chain, Single Die Block, 250 HP Motor
• Bar Wash, Bar Feed Conveyor, Siemens Simatic HMI Digital Controller
• Reeler To Remove Inner Mandrel Bars From Tubes, Tube Conveyor, Entry & Exit Conveyors, Tooling

Savage Abrasive Tube Cutting Saw

• Capacity: 24" Wide Layer of Tubes
• Inlet & Outlet Conveyor
• Back Stop, Dust Collector, Spare Blades
• Top & Bottom Clamps

Satec Systems Tensile Tester

• U.T.M Model Vertex 60HVL
• Serial No. 1600 with Instron System ID 60HVL C1600 & Monitor & Printer

Cooking, Roasting, Processing & Packaging

Roasters, Fryers, S/S Oil Storage Tanks & Oil Mixing Skid
(3) 6,500, (1) 5,000 & (2) 3,000 Gallon Oil Storage Tanks
Cooling Tunnels, Tumblers, New Honeywell Burners

Packing Equipment Including:

Ishida Bucket Scales
Mettler Toledo X-Ray & Fortress Metal Detectors
Induction & Vacuum Bag Sealers
Bucket & Elevator Conveyor
Ingersoll Rand Total Air System
(2) Top Tier Palletizers & (1) Depalletizer

(2) 2020 MJC Air Rotation Units

S/N: 10000000285 & 10000000286
Air Flow: SA: 65,000 CFM (Min: 61,750 CFM, Max: 68,250 CFM)
Max Fluid Temp: 300°F • Max Fluid Pressure: 250 PSI
Fluid In: 42°F • Fluid Out: 56°F
460VAC, 60Hz, 3 Ph
New Cost Each: $220,000

Canariis HVAC Packaged Pumping/Cooling System

Model: Q-562-70/85-EC-2V, ID: 20-0292
460V, 3PH, 60Hz, 62.5HP
Max Liquid Temp: 150°F • Max Liquid Pressure: 125 PSIG
Cost New: $240,000

Trane Climate Changer Air Handler

Model: H2B809A / A, S/N: H20K86023
460V, 60Hz, 3 Ph
Max Output Air Temp: 200°F • Max Water Pressure: 300 PSIG
7.5HP